ConfigMgr – ConfigMgr with Necro Monkey

ConfigMgr Client Boundary and Boundary Group memberships SQL Query

ConfigMgr current branch SQL query to return the boundaries and boundary groups systems are part of.

https://github.com/NecroMonkey/vault/blob/master/SQL/client_boundary_membership_update.sql


SELECT DISTINCT 

sysr.Netbios_Name0,

ipr.Name as &#91;Boundary],

ipr.BoundaryType as &#91;Type],

bg.Name AS &#91;Boundary Group]

FROM     v_R_System AS sysr INNER JOIN

                  System_IP_Address_ARR AS ip ON ip.ItemKey = sysr.ResourceID AND ip.NumericIPAddressValue &lt;> 0 INNER JOIN

                  v_RA_System_IPSubnets AS sub ON sub.ResourceID = sysr.ResourceID LEFT OUTER JOIN

                  v_RA_System_IPv6Prefixes AS v6 ON v6.ResourceID = sysr.ResourceID INNER JOIN

                  BoundaryEx AS ipr ON ipr.BoundaryType = 3 AND ip.NumericIPAddressValue BETWEEN ipr.NumericValueLow AND ipr.NumericValueHigh OR

                  ipr.BoundaryType = 1 AND ipr.Value = sysr.AD_Site_Name0 OR

                  ipr.BoundaryType = 0 AND ipr.Value = sub.IP_Subnets0 OR

                  ipr.BoundaryType = 2 AND ipr.Value = v6.IPv6_Prefixes0 INNER JOIN

                  vSMS_BoundaryGroupMembers as bgm ON ipr.BoundaryID = bgm.BoundaryID INNER JOIN

                  vSMS_BoundaryGroup as bg ON bgm.GroupID = bg.GroupID

GROUP BY sysr.Netbios_Name0, ipr.Name, ipr.BoundaryType, bg.Name

ORDER BY sysr.Netbios_Name0, ipr.Name, bg.Name

ConfigMgr Client Content Breakdown SQL Query

This SQL query for ConfigMgr current branch gives a breakdown of client content. It is also on my GitHub at https://github.com/NecroMonkey/vault/blob/master/SQL/ConfigMgr_content_source_breakdown.sql


drop table if exists ##temp1

drop table if exists ##temp2



SELECT distinct sysr.Name0,

sysr.ResourceID, ipr.Name as &#91;Boundary],

ipr.Value

into ##temp1

FROM v_R_System sysr

JOIN System_IP_Address_ARR ip ON ip.ItemKey = sysr.ResourceID AND ip.NumericIPAddressValue &lt;> 0     

JOIN v_RA_System_IPSubnets sub ON sub.ResourceID = sysr.ResourceID      

LEFT JOIN v_RA_System_IPv6Prefixes v6 ON v6.ResourceID = sysr.ResourceID

JOIN BoundaryEx AS ipr ON 

-- Check BoundaryType 3 (IPRANGE)

(ipr.BoundaryType = 3 AND ip.NumericIPAddressValue BETWEEN ipr.NumericValueLow AND ipr.NumericValueHigh)

-- Check BoundaryType 1 (ADSITE)

OR (ipr.BoundaryType = 1 AND ipr.Value = sysr.AD_Site_Name0) 

-- Check BoundaryType 0 (IPSUBNET)

OR (ipr.BoundaryType = 0 AND ipr.Value = sub.IP_Subnets0)

-- Check BoundaryType 2 (IPv6)

OR (ipr.BoundaryType = 2 AND ipr.Value = v6.IPv6_Prefixes0)

order by sysr.ResourceID



select rsys.Name0, rsys.ResourceID,

"Content Source Type" = CASE cdhs.DistributionPointType

WHEN 1 THEN 'Cloud DP (Distribution Point)'

WHEN 2 THEN 'Management Point'

WHEN 3 THEN 'Peer Cache'

WHEN 4 THEN 'DP (Distribution Point)'

WHEN 5 THEN 'BranchCache'

WHEN 6 THEN 'Delivery Optimization Peer'

WHEN 7 THEN 'Delivery Optimization Cache Server'

WHEN 8 THEN 'Microsoft Update'

END,

packages.Name as &#91;Content],

cdhs.ContentID,

CAST(SUM(cast(cdhs.BytesDownloaded as float)) / 1073741824 AS DECIMAL(10,2)) as &#91;GB]

into ##temp2

from

v_R_System as rsys

join ClientDownloadHistory as cdh on rsys.ResourceID = cdh.ClientId

join ClientDownloadHistorySources as cdhs on cdh.id = cdhs.DownloadHistoryID

join ClientDownloadHistoryBoundaryGroups as cdhbg on cdh.id = cdhbg.DownloadHistoryID JOIN

                         v_FullCollectionMembership AS a ON rsys.ResourceID = a.ResourceID JOIN

                         v_Collection AS b ON b.CollectionID = a.CollectionID LEFT JOIN CI_Contentpackages CI on CI.Content_UniqueID = cdhs.ContentID 

JOIN smspackages packages on packages.PkgID = ISNULL(CI.PkgID,cdhs.ContentId)

where (b.CollectionID = 'SMSDM003')

group by rsys.Name0, rsys.ResourceID, cdhs.DistributionPointType, packages.Name, cdhs.ContentID

order by rsys.Name0, rsys.ResourceID, cdhs.DistributionPointType, packages.Name, cdhs.ContentID



select

t1.Name0, t1.Boundary, t1.Value, t2.&#91;Content Source Type], t2.Content, t2.GB

from ##temp1 as t1 join

##temp2 as t2 on t1.ResourceID = t2.ResourceID



drop table if exists ##temp1

drop table if exists ##temp2

ConfigMgr Run Script – Kickoff Compliance Baseline Check

I came across a code snippet by Mick Pletcher () that you can add to the end of a compliance item script to kick off the evaluation of a baseline. I took that and added a parameter to it so you can use it as a ConfigMgr Run Script. It look like a lot of code but 90% is just documentation.

ConfigMgr PowerShell Script – Create Collections off Compliance Settings Configuration Items

The script uses Get-CMConfigurationItem cmdlet to get a list of LocalizedDisplayNames of Compliance Setting CIs and then runs a Foreach to create three collections based using the LocalizedDisplayName. Parameters specify the CM Site Code, Limiting Collection collection ID, and the CI Name. It does a check to see if a collection exists beofre creating which is also a self repair feature as a deleted collection will be recreated.

ConfigMgr Run Script – Set Service State

As you can tell, many of my script posts occur after something was needed at work and I ended scripting it. This time we needed to alter the startup of a service on a group of systems. I wrote this PowerShell script to set the startup type and status of a specified service. It does require three parameters: service name, startup type desired, and desired status.

ConfigMgr Log Collector Run Script

In most environment I have worked in, I have not had access or easy access to some systems I was expected to troubleshoot ConfigMgr issues on especially servers. I would normally have to ask for someone to send me logs and half the time needed to explain where to find that logs. I wrote a quick ConfigMgr Run Script that I can target against a system or collection and no longer have to ask for logs because the script will get them for me.

ConfigMgr Content Source Breakdown Report

We recently start implementing BranchCache and PeerCache with ConfigMgr. I wanted to be able to report back to management where clients were getting content, how much was being downloaded, what the top content grabbed by source type, number of peer source by domain, boundaries missing PeerCache super peers, and peer content source counts by boundary. It is a lot of data and takes some time to run, but I felt the need to share my report with others.

RDL file is in my GitHub repository – https://github.com/NecroMonkey/vault/blob/master/SSRS-Reports/ContentSourceBreakdown/Content%20Source%20Breakdown.rdl